Gear Accessories

GENX
Made of 100% heavy 2” elastic webbing with a full “X” support on the back, GENX suspenders are available in Standard or Pull Strap style with 12”x3” universal neoprene foam suspender pads available for both. Determining size: Measure from your back tab over the shoulder to the front tab.
genx2
Made of 100% heavy 2” elastic webbing with a full “X” support on the back, GENX suspenders are available in Standard or Pull Strap style with 12”x3” universal neoprene foam suspender pads available for both. Determining size: Measure from your back tab over the shoulder to the front tab.
pocket tool grab
Golfire's Tool Grab has seven individual pockets plus one large 7" X 8" pocket for larger items such as rope or webbing. The Tool Grab easily fits in any bunker pocket . Included is a grab loop that hangs outside of the pocket for easy access when in need. All your tool are secure with a Velcro flap that allows easy access. Made of Ballistic Nylon with elastic pockets.
Mask Strap
A 1" Kevlar® Strap with metal quick clips attaches directly to your SCBA mask, and features a
center snap which allows for immediate separation should it become hung up.
Mask Clip
The Mask Radio Clip features two scissor clips that attach to the rings on your mask and easily attach to any D-ring on your gear!
Gear claw
The Gear Claw is for the Firefighter on the go. The heavy carabineer holds your boots and bunkers while the loop with the male /female connector holds your coat. Included are two scissor clips for your helmet and mask. All your gear is held together and is extremely easy to access.
Mag Light Pliers Case
Made of heavy seatbelt webbing, fits on any belt that is 3" or less.
Leatherman Knife Case
Made of heavy 4" webbing, fits on any belt 3" or less, and features a cover that snaps into place.
Quick pocket tool pouch
Quick Pocket Roll Out Tool Pouch includes six pockets which roll open for easy access. Ideal for wire cutters, punches, tape, screw drivers, pens, and more. Made from 1000 Denier Cordura®. and available in multiple colors.
Large Webbing Storage Pouch
Made of Heavy Cotton Duck to take the wear. Holds up to 50' of 1 inch tubular webbing. Closure is made of 2" Velcro with long flap for easy opening and closing. Fits into any pocket or placed on your belt/SCBA harness with two rear 2" Velcro straps.
Belt Harness Loop
Golfire's Belt Harness Loops fit between the snaps of the lining and outer shell of your pants. They can be used on the outside for attachment of a harness or belt or on the inside for an interior harness.
Goggle shed
Golfire's goggle cover is made of Nomex®, and tapered to the contour of your goggles, and features two 4” Velcro® closures for ease of storage and removal. One Size fits all. Available in black with 3M Triple Trim.
Gear Carry Strap
The Bunker Gear Strap wraps around the bottom of the boots through the pull straps securing your gear together. included if four carabineers to attach gloves, helmet, mask, and any other accessories you may carry.
Roll out tool pouch
The Roll Out Tool Pouch laid out is 16" wide x 13" high. There are three 3" x 10” pockets, three 2” x 10” pockets, and 3 3/4” pockets. ideal for wire cutters, snips, pens, window punches, ect...
Belt Tool Pouch
The Belt Tool Pouch is made of Heavy Army Cotton Duck. Easy fits on any belt, take up strap, or simply in your pocket. Holds pliers, scissors, punches, tape, and more. The two inch front flap folds down giving you easy access to tools. The velcro closure keeps all of your tools in place until ready to use.
Goggle Cover
Golfire's goggle cover is made of Nomex®, and tapered to the contour of your goggles, and features two 4” Velcro® closures for ease of storage and removal. One Size fits all. Available in black with 3M Triple Trim.
Rubber Glove Pouch
Golfire's Glove Pouch holds on to four pairs of Rubber Gloves and attaches to any belt, suspender strap or EMS bag.
Vest Bags
Golfire's Vest Bag was made to accommodate the new ANSI regulation requiring all fire personnel to wear safety vests on the highway at all times. Instead of vests littering the cab of your vehicle, keep all your vests stored in the same location for quick and easy access. We are producing three sizes: a personal pocket vest bag, a four and an eight vest bag. Vest are folded just like a T-shirt, piled together, and then placed in the bag until next use. Included= handle for carrying and storage
Quick Release Light Holder
The Heavy Duty Quick Release Light Holder attaches to any belt, SCBA Harness, or bunker pant pull strap. Easily connects to the handle of any light box and the male/female connector allows you to drop the light box quickly during an emergency. You light will also pivot forward when crawling. Available in many colors!
Rubber Helmet Strap
A heavy black rubber band 1" wide by 10"s flat with a circumference of 20" un-stretched.
Show More

© 2023 by Name of Template. Proudly created with Wix.com

GOLFIRE, INC. PO BOX 7, BALDWINSVILLE, NY 13027 877-727-6673 FAX 315-720-1243 Email: info@gloveholders.com